Standard Water Temperature Controller
Description
This series can be used effectively to solve many defects on polymer molding, such as weld marks, flow marks, ruffles, silver marks and enhance products' surface with glossy like mirror. It is unnecessary for secondary processing on spraying to products, increasing the rate of good finished products by 20% to 30%. It can solve the surface shrinkage of plastic products completely to make high quality of products appearance.For thin wall molding, it can improve the melted resin fluidity faster during the polymer filling (packing) phase for ensuring products' quality & strength. The cycle time for thickness parts molding will be reduced up to 60% to enhance the productivity greatly.
Models: DY-MTC9-W
1. PID controller with deviation within ±0.1℃.
2. Intelligent control panel display--shows temperatures of outlet and inlet and each specific Error on(It is clear to know each Error) and provides visualized and direct setting.
3. Adopt the direct cooling, the highest temp can reach 120℃
4. Adopt microcomputer control panel, it is easy to operate and maintenance
5. Exquisite appearance with small footprint
6. Equipped with the buzzer for the alarm
7. Installed the water pressure meter, pressure switch, solenoid valve thermal sensor, relief valve and multiple safety devices.
8. Our MTC has multiple alarm and protection function as the following:
① Phase sequence error alarm
② Three-phase imbalance protection
③ Lack water protection
④ Pump overload protection
⑤ High pressure protection, safety pressure relieving, automatic water supplying and air exhausting.
⑥ Overheat alarm
⑦ Temp high alarm
⑧ Temp low alarm
⑨ Temp different high alarm
⑩ Automatic air exhausting at starts up
⑪ Automatic cooling at turn-off
| Model | DY-MTC9-W |
| Temperature Control Accuracy | P.I.D ± 0.1℃ |
| Heat Transfer Medium | Water |
| Cooling Method | Direct Cooling |
| Power Supply | AC200V/380V/415V/50HZ 3Phase |
| Max Temperature(℃) | 120 |
| Heating Power(KW) | 9 |
| Pump Power(HP) | 1 |
| Pump Flow(L/Min) | 165 |
| Pump Pressure(KG) | 3 |
| Circulating Water Pipe(Inch) | 3/8*4 |
| Size(MM) | 800*410*630 |
| Weight | 72 |
-
Rubber Extrusion Factory
-
Plastic & rubber industry
-
Foaming Tube Factory
-
Die-casting Factory
Related Products
- About Us
- Company Profile
- Our Culture
- Enterprise Honor
- Factory Tour
- Powerful Industry Strength
- Video
- Download
- Products
- Industrial Cooling Series
- Mold temperature control series
- Plastic crushing & recycling series
- Mixing Series
- Drying & Dehumidifying Series
- Feeding & Conveying Series
- Solutions
- Central Cooling System
- Drying And Dehumidifying System
- Crushing And Recycling System
- Central Feeding System
- Extrusion Blow Moulding System
- PET Preform System
- Contact Us
- Email: info@dgdinyuan.com
- TEL: +86-769-83503283
- Add: Building B First Floor No.3 Xinglong 2nd Road xiaxu Village Changping Town Dongguan City Guangdong, China
